Fasteners – Test Launch
Bosch Rexroth accessories
The key to a grate product is often the accessories, Bosch Rexroth has allot of them. The below listed are just a selected few that is stocked in Stavanger – Rogaland and the complete assortment can accessed by following the link below
Bake linken under i “Link” som heter “Bosch Rexroth Accessories”
https://store.boschrexroth.com/Assembly-Technology/Basic-mechanic-elements?cclcl=nb_NO
EMOX AS are also developing Bosch Rexroth extrusion profile accessories, we can make what you need and on laser cut plastic products we can even add your company logo. Reach out for support or a quote.
Previous
Next
GUSSET 80X80
3842530231
Casted aluminium bracket (standard) 80×80
This bracket set is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Bracket (standard) 80×80 – galvanized fasteners
- Brackets with centering lugs for rapid, precise assembly with protection against turning
- Centering lugs can be easily broken off for assembly on plates or at right angles to the slot
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Cover cap to protect from dirt, available in signal gray (RAL 7004) and black ESD (RAL 9005)
- Profile finishing: not required
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Dimensions | 80×80 |
| ESD | yes |
| Packaging unit | 20 |
| Material | Diecast aluminum, vibratory ground |
| Torsional moment [Nm] | 400 |
| Bending moment 1 [Nm] | 500 |
| Bending moment 2 [Nm] | 1000 |
| Recommended accessories | |
| Weight [kg] | 0.243 |
Documents
Datasheet
CAD
Previous
Next
GUSSET 40X80 SET
3842529386
Casted aluminium bracket 40×80 set (standard)
This bracket set is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Angle 40×80 set (standard) – galvanized fasteners
- Brackets with centering lugs for rapid, precise assembly with protection against turning
- Centering lugs can be easily broken off for assembly on plates or at right angles to the slot
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Cover cap to protect from dirt, available in signal gray (RAL 7004) and black ESD (RAL 9005)
- Profile finishing: not required
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Dimensions | 40×80 |
| ESD | yes |
| Fastening material included | yes |
| Bending moment 1 [Nm] | 180 |
| Bending moment 2 [Nm] | 400 |
| Fastening material | 4x T-bolt M8x25,4x flange nut M8 |
| Material information | Bracket: Diecast aluminum, vibratory ground, Fastening material: Steel, galvanized |
| Scope of delivery | incl. fastening material (FS),Bracket (standard) |
| Torsional moment [Nm] | 60 |
| Material | Diecast aluminum, vibratory ground |
| Recommended accessories | |
| Weight [kg] | 0.212 |
Documents
Datasheet
CAD
3D CAD
Previous
Next
GUSSET 40X40 SET
3842529383
Casted aluminium bracket 40×40 set (standard)
This bracket set is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Bracket 40×40 set (standard) – galvanized fasteners
- Brackets with centering lugs for rapid, precise assembly with protection against turning
- Centering lugs can be easily broken off for assembly on plates or at right angles to the slot
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Cover cap to protect from dirt, available in signal gray (RAL 7004) and black ESD (RAL 9005)
- Profile finishing: not required
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Dimensions | 40×40 |
| ESD | yes |
| Fastening material included | yes |
| Bending moment 1 [Nm] | 55 |
| Bending moment 2 [Nm] | 145 |
| Fastening material | 2x T-bolt M8x20,2x flange nut M8 |
| Material information | Bracket: Diecast aluminum, vibratory ground, Fastening material: Steel, galvanized |
| Scope of delivery | incl. fastening material (FS),Bracket (standard) |
| Torsional moment [Nm] | 35 |
| Material | Diecast aluminum, vibratory ground |
| Recommended accessories | |
| Weight [kg] | 0.079 |
Documents
Datasheet
CAD
Previous
Next
GUSSET 20X20 SET
3842523511
Casted aluminium bracket 20×20 set (standard)
This gusset set is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Bracket 20×20 set (standard) – galvanized fasteners
- Brackets with centering lugs for rapid, precise assembly with protection against turning
- Centering lugs can be easily broken off for assembly on plates or at right angles to the slot
- Version designLINE with special silver paint (RAL 9006) for an especially high-quality design
- Intermediate element for positioning brackets in the next largest slot
- Cover cap to protect from dirt, available in signal gray (RAL 7004) and black ESD (RAL 9005)
- Profile finishing: not required
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 6 |
| Dimensions | 20×20 |
| ESD | yes |
| Fastening material included | yes |
| Packaging unit | 1 |
| Bending moment 2 [Nm] | 25 |
| Fastening material | 2X cylinder head screw DIN 7984-M6x12, 2x T-nut groove 8 M6 |
| Bending moment 1 [Nm] | 6 |
| Material information | Bracket: Diecast aluminum, vibratory ground, Fastening material: Steel, galvanized |
| Scope of delivery | incl. fastening material (FS),Bracket (standard) |
| Material | Diecast aluminum, vibratory ground |
| Recommended accessories | |
| Weight [kg] | 0.013 |
Documents
Datasheet
CAD
Previous
Next
CUBIC JOINT 40/3 SET
3842549868
Casted aluminium cubic connector 40/3 set (standard)
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Cubic connector 40/3 set (standard) – galvanized fasteners
- Profile finishing: not required
- For torsion-resistant corner connection of profiles with equal cross-sections
- Cover caps to cover the openings
- Screw fitting on profile with self-tapping screws
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Dimensions | 40×40 |
| ESD | yes |
| Color | Signal gray |
| Number of outlets | 3 |
| Fastening material | 3x screw S12x30 |
| Bending moment 3P [Nm] | 70 |
| Scope of delivery | Incl. fastening material,Cubic connector (standard),Cover cap D24, signal gray (PP) |
| Material information | Cubic connector: Diecast aluminum,Fastening material: Steel, galvanized |
| Material | Diecast aluminum |
| Notice | Cubic connector creates conductive connection, but the cover caps included in the set are not ESD-compatible. |
| Recommended accessories | |
| Weight [kg] | 0.157 |
Documents
Datasheet
CAD
CUBIC JOINT 20/3 SET
3842549860
Casted aluminium bracket cubic connector 20/3 set (standard)
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Cubic connector 20/3 set (standard) – galvanized fasteners
- Profile finishing: not required
- For torsion-resistant corner connection of profiles with equal cross-sections
- Cover caps to cover the openings
- Screw fitting on profile with self-tapping screws
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 6 |
| Dimensions | 20×20 |
| ESD | yes |
| Number of outlets | 3 |
| Color | Signal gray |
| Fastening material | 3x countersunk screw S6x16 |
| Scope of delivery | Incl. fastening material,Cubic connector (standard),Cover cap D12, signal gray (PP) |
| Bending moment 3P [Nm] | 23 |
| Material information | Cubic connector: Diecast aluminum,Fastening material: Steel, galvanized |
| Material | Diecast aluminum |
| Notice | Cubic connector creates conductive connection, but the cover caps included in the set are not ESD-compatible. |
| Recommended accessories | Cover cap D12, black (PP) |
| Weight [kg] | 0.021 |
Documents
Datasheet
CAD
Previous
Next
T-NUT 6 M4 VA [SS]
3842536599
T-nut 6 mm slot M4 – stainless steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
T-nut 6 mm slot M4 – stainless steel
- Standard element for secure, conductive connections
- Stop for correct positioning in the profile slot
- Stainless steel T-nut, e.g. for outdoor or cleanroom applications
- Profile finishing: not required
- Insulating cover cap for decoupling directly grounded components; for use with T-nuts for 8 mm slots in a 10 mm slot
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 6 |
| ESD | yes |
| Thread size | M4 |
| Packaging unit | 100 |
| Material | Stainless steel |
| Groove retention [Fmax] [N] | 1700 |
| Required accessories | insulating cap |
| Weight [kg] | 0.001 |
Documents
Datasheet
CAD
Previous
Next
T-NUT 6 M4
3842523135
T-nut 6 mm slot M4 – galvanized steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
T-nut 6 mm slot steel M4 – galvanized steel
- Standard element for secure, conductive connections
- Stop for correct positioning in the profile slot
- Profile finishing: not required
- Insulating cover cap for decoupling directly grounded components; for use with T-nuts for 8 mm slots in a 10 mm slot
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 6 |
| ESD | yes |
| Thread size | M4 |
| Packaging unit | 100 |
| Material | Steel, galvanized |
| Groove retention [Fmax] [N] | 1700 |
| Required accessories | insulating cap |
| Weight [kg] | 0.0011 |
Documents
Datasheet
CAD
3D CAD
Previous
Next
T-NUT 10 M6
3842530285
T-nut 10 mm slot M6 – galvanized steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
T-nut 10 mm slot M6 – galvanized steel
- Profile finishing: not required
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| ESD | yes |
| Thread size | M6 |
| Packaging unit | 100 |
| Notice | Suitable for standard screws. Attention: T-nuts have driving torque for safe turning in the base of the groove, Groove retention refers to M8 |
| Min. groove retention [Fmin] [N] | 6000 |
| Max. groove retention [Fmax] [N] | 18000 |
| Material | Steel, galvanized |
| Required accessories | insulating cap |
| Weight [kg] | 0.006968 |
Documents
Datasheet
CAD
Previous
Next
T-NUT 10 M6 VA [SS]
3842536604
T-nut 10 mm slot M6 – stainless steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
T-nut 10 mm slot M6 – stainless steel
- Standard element for secure, conductive connections
- Stop for correct positioning in the profile slot
- Stainless steel T-nut, e.g. for outdoor or cleanroom applications
- Profile finishing: not required
- Insulating cover cap for decoupling directly grounded components; for use with T-nuts for 8 mm slots in a 10 mm slot
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| ESD | yes |
| Thread size | M6 |
| Packaging unit | 100 |
| Notice | Groove retention refers to M8 |
| Min. groove retention [Fmin] [N] | 6000 |
| Max. groove retention [Fmax] [N] | 18000 |
| Material | Stainless steel |
| Required accessories | insulating cap |
| Weight [kg] | 0.007 |
Documents
Datasheet
CAD
3D CAD
Previous
Next
T-NUT 10 M8
3842530287
T-nut 10 mm slot M8 – galvanized steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
T-nut 10 mm slot M8 – galvanized steel
- Standard element for secure, conductive connections
- Stop for correct positioning in the profile slot
- Profile finishing: not required
- Insulating cover cap for decoupling directly grounded components; for use with T-nuts for 8 mm slots in a 10 mm slot
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| ESD | yes |
| Thread size | M8 |
| Packaging unit | 100 |
| Notice | Suitable for standard screws. Attention: T-nuts have driving torque for safe turning in the base of the groove. |
| Min. groove retention [Fmin] [N] | 6000 |
| Max. groove retention [Fmax] [N] | 18000 |
| Material | Steel, galvanized |
| Required accessories | insulating cap |
| Weight [kg] | 0.00573 |
Documents
Datasheet
CAD
3D CAD
Previous
Next
T-NUT 10 M8 VA [SS]
3842536603
T-nut 10 mm slot M8 – stainless steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
T-nut 10 mm slot M8 – stainless steel
- Standard element for secure, conductive connections
- Stop for correct positioning in the profile slot
- Stainless steel T-nut, e.g. for outdoor or cleanroom applications
- Profile finishing: not required
- Insulating cover cap for decoupling directly grounded components; for use with T-nuts for 8 mm slots in a 10 mm slot
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| ESD | yes |
| Thread size | M8 |
| Packaging unit | 100 |
| Material | Stainless steel |
| Min. groove retention [Fmin] [N] | 6000 |
| Max. groove retention [Fmax] [N] | 18000 |
| Required accessories | insulating cap |
| Weight [kg] | 0.00584 |
Documents
Datasheet
CAD
Previous
Next
T-SLOT STONE 6 M4 VA [SS]
3842523140
Sliding block 6mm slott M4 – stainless steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block 6mm slot M4 – stainless steel
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 6 |
| ESD | yes |
| Thread size | M4 |
| Length [l] [mm] | 12 |
| Dimension h [mm] | 4 |
| Packaging unit | 100 |
| Dimension h1 [mm] | 1 |
| Material | Steel, stainless |
| Groove retention [Fmax] [N] | 3000 |
| Required accessories | Spring |
| Weight [kg] | 0.003 |
Documents
Datasheet
CAD
Previous
Next
T-SLOT STONE 8 M6 TA BORT, IKKE STOCKED – VI MANGLER DEN OVER I GALV; sliding block M4
3842514930
Sliding block groove 8 steel, galvanized, M6
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block 6mm slot M68 steel, galvanized, M6
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 8 |
| Thread size | M6 |
| Packaging unit | 100 |
| Dimension h [mm] | 6 |
| Length [l] [mm] | 16 |
| Dimension h1 [mm] | 2 |
| Groove retention [Fmax] [N] | 6000 |
| Material | Steel, galvanized |
| Required accessories | Spring |
| Weight [kg] | 0.00818 |
Documents
Datasheet
CAD
3D CAD
Previous
Next
T-SLOT STONE 8 M6 – TA BORT, IKKE STOCKED
3842514930
Sliding block groove 8 steel, galvanized, M6
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block groove 8 steel, galvanized, M6
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 8 |
| Thread size | M6 |
| Packaging unit | 100 |
| Dimension h [mm] | 6 |
| Length [l] [mm] | 16 |
| Dimension h1 [mm] | 2 |
| Groove retention [Fmax] [N] | 6000 |
| Material | Steel, galvanized |
| Required accessories | Spring |
| Weight [kg] | 0.00818 |
Documents
Datasheet
CAD
3D CAD
SPRING R, FUER NUT10
3842516669
Spring groove 10
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Spring groove 10
- The spring assists with the assembly and positioning of the sliding block and swivel-in sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Packaging unit | 100 |
| Material | Spring steel, stainless |
| Weight [kg] | 0.00082 |
Documents
Datasheet
CAD
Previous
Next
T-SLOT STONE 10 M6
3842528738
Sliding block 10mm slot M6 – galvanized steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block 10mm slot M6 – galvanized steel
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Thread size | M6 |
| Dimension h [mm] | 10.5 |
| Length [l] [mm] | 20 |
| Dimension h1 [mm] | 5 |
| Packaging unit | 100 |
| Min. groove retention [Fmin] [N] | 11000 |
| Max. groove retention [Fmax] [N] | 24000 |
| Material | Steel, galvanized |
| Required accessories | Spring |
| Weight [kg] | 0.02 |
Documents
Datasheet
CAD
Previous
Next
T-SLOT STONE 10 M6 VA [SS]
3842547812
Sliding block 10mm slot M6 – stainless steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block 10mm slot M6 – stainless steel
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| ESD | yes |
| Thread size | M6 |
| Packaging unit | 100 |
| Dimension h [mm] | 10.5 |
| Length [l] [mm] | 20 |
| Dimension h1 [mm] | 5 |
| Max. groove retention [Fmax] [N] | 24000 |
| Min. groove retention [Fmin] [N] | 11000 |
| Material | Steel, stainless |
| Required accessories | Spring |
| Weight [kg] | 0.019 |
Documents
Datasheet
CAD
Previous
Next
T-SLOT STONE 10 M8
3842528735
Sliding block 10mm slot M8 – galvanized steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block 10mm slot M8 – galvanized steel
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| Thread size | M8 |
| Packaging unit | 100 |
| Dimension h [mm] | 10.5 |
| Length [l] [mm] | 20 |
| Dimension h1 [mm] | 5 |
| Max. groove retention [Fmax] [N] | 24000 |
| Material | Steel, galvanized |
| Min. groove retention [Fmin] [N] | 11000 |
| Required accessories | Spring |
| Weight [kg] | 0.017448 |
Documents
Datasheet
CAD
Previous
Next
T-SLOT STONE 10 M8 VA [SS]
3842547811
Sliding block 10mm slot M8 – stainless steel
This product is stored in Stavanger – Rogaland
Description
Specifications
Documents
CAD
Description
Sliding block 10mm slot M8 – stainless steel
- Profile finishing: not required
- Sliding block for reliable absorption of high forces
- Spring assists with the assembly and positioning of the sliding block
Specifications
| Produktattributter | |
|---|---|
| Profile slot | 10 |
| ESD | yes |
| Thread size | M8 |
| Packaging unit | 100 |
| Dimension h [mm] | 10.5 |
| Length [l] [mm] | 20 |
| Dimension h1 [mm] | 5 |
| Max. groove retention [Fmax] [N] | 24000 |
| Material | Steel, stainless |
| Min. groove retention [Fmin] [N] | 11000 |
| Required accessories | Spring |
| Weight [kg] | 0.01744 |
Documents
CAD